AE Techron2507 Warren St.Elkhart, INPhone: 574-295-9495Fax: 574-295-9496www.aetechron.com
AE Techron focuses on quick to market development of power conversion and amplifier systems for difficult environments. EMC Amplifiers for DO-160 & Mil-Std 461 • Low Frequency & Audio Amplifiers • DC-300KHz • 1KVA-20KVA
Amplifier Research160 Schoolhouse RoadSouderton, PAPhone: 215-723-8181Fax: 215-723-5688www.arworld.us
For more than 30 years, Amplifier Research has been building a reputation for quality, consistency, and dependability. AR has become the number one EMC test equipment provider by thoroughly understanding their customer's needs and responding with innovative solutions that make test procedures easier, more efficient and more reliable.
AR manufactures broadband high-power amplifiers from dc to 40GHz (from 1 to 50,000 watts). These amplifiers are primarily used for radiated and conducted susceptibility testing but are equally suitable for general laboratory use (component testing, plasma studies, mass spectroscopy and heating). Available test accessories include antennas, directional couplers, field monitoring equipment, power meters and precompliance EMC systems. A line of transient generators for IEC, automotive, telecom, medical and component testing is also available. These transient generators offer the capability to meet test routines to spec, modify existing spec-based routines (already programmed in) or design your own.
Anritsu is the industry standard for RF and Microwave Test and Measurement equipment for both field and lab environments, with instruments operating at all frequencies up to 110 GHz and beyond. Our handheld Site Master Cable and Antenna Analyzer, for example, enables field technicians to troubleshoot microwave cables and communication systems and detect problems before they become costly, time-consuming system failures. Other products are suitable for R&D and manufacturing applications, providing extremely accurate measurements of power, network analysis, signal analysis and frequency.
Anritsu offers a complete range of test and measurement equipment for the optical communications industry including R&D, production, installation, monitoring, and manufacturing. Anritsu is a recognized leader in high-speed optical technology offerings and field test solutions including evaluating a wide range of optical devices and fiber systems like DWDM. Critical measurements such as OTDR, Chromatic Dispersion, Polarization Mode Dispersion, Loss Test Set, and Optical Return Loss can be made quickly and accurately to maximize network performance and accelerate the deployment of new services.
AR Modular RF is recognized worldwide as a leading supplier of RF amplifier systems and RF amplifier modules. We’re known for innovative technology, unsurpassed quality & dependability, and for an international support and service network that is second to none.
With output powers from 5 – 5,000 watts and spanning frequencies from 0.01 – 6,000 MHz, the systems and modules we create are used for military communications, electronic warfare & electronic countermeasures, homeland security, and a variety of medical/scientific/industrial applications.
Perhaps most important, AR Modular RF helps customers find the best solutions to their most demanding requirements by offering customer-specific designs and semi-custom modifications to our existing line of products.
Ardent Concepts was founded in 2003 by Gordon Vinther & Steve Cleveland to meet the challenges and demands presented by engineers seeking to create the world’s fastest, highest performing electronic systems. Ardent’s Intellectual Property has enabled the creation of high-performance electronic interface products that provide exceptional signal integrity and design flexibility in a cost-effective package.
These products have been deployed in multiple industries including Semiconductor, Computing, Communications, and Defense. Customers include Intel, Broadcom, Analog Devices, Micron, Cisco, Lockheed Martin, and BAE.
Boonton Electronics Corp.25 Eastmans RoadParsippany, NJPhone: (973) 386-9696Fax: (973) 386-9191www.boonton.com
Boonton Electronics Corporation is a manufacturer of test equipment dedicated to measuring the power of RF and microwave systems used in both military and commercial sectors. The company also manufactures impedance measuring instruments, RF voltmeters and audio analyzers.
The company's products are used to test terrestrial and satellite communications, radar telemetry, electronic warfare (EW), electronic countermeasures (ECM), and an expanding number of wireless communications products.
dBm32A Spruce StreetOakland, NJPhone: (201) 677-0008Fax: (201) 677-9444www.dbmcorp.com
Synthesized Signal Generator, Satellite Link Emulation, Carrier to Noise Generators, White Gaussian Noise Generators, Frequency Converters, RF Interfaces, Frequency Synthesizers, Broadband Solid State Attenuators
FormFactor, Inc.9100 SW Gemini DriveBeaverton, ORPhone: (503) 601-1000Fax: (503) 601-1002www.formfactor.com
FormFactor is a leading provider of essential test and measurement technologies along the full IC life cycle – from characterization, modeling, reliability, and design debug, to qualification and production test. Semiconductor companies rely upon FormFactor’s products and services to accelerate profitability by optimizing device performance and advancing yield knowledge. FormFactor’s leading-edge probe stations, probes, probe cards, advanced thermal subsystems and integrated systems deliver precision accuracy and superior performance both in the lab and during production manufacturing of high-speed and high-density semiconductor chips.
Founded in 1998 and headquartered in Stroudsburg, Pennsylvania, MegaPhase designs, manufactures, and markets high-performance radio frequency (RF) coaxial cables and connectors for original equipment manufacturers (OEMs) that build advanced microwave and optical electronic systems, such as test instrumentation, defense electronics, homeland defense, satellites, broadband data, and communications systems.
NoiseCom25 Eastmans RoadParsippany, NJPhone: (201) 261-8797Fax: (201) 261-8339www.noisecom.com
Noisecom is a global provider of electronic noise generation equipment and noise sources in the commercial and military telecommunications fields. Utilized for accurate, reliable measurements, users look to Noisecom for specialized assistance with their equipment design.
RF Noise Components
Eb-No, NPR, CATV & Optical Test Sets
RIGOL Technologies7401 First Pl., Suite NOakwood Village, OHPhone: (877) 474-4651Fax: (440) 232-4499www.rigolna.com
RIGOL Technologies has developed a complete line of digital oscilloscopes, RF Spectrum Analyzers, Digital Multimeters, Function/Arbitrary Waveform Generators and Digital Programmable Power Supplies that are widely used in electronic manufacture and maintenance, RF education, R&D, failure analysis, component testing and general bench testing.
Signal Microwave is a manufacturing and consulting company located in Chandler, Arizona. The company was founded by Engineers with decades of experience and a proven track record of designing and building RF/microwave connectors and test boards. Our primary mission is creating solutions for the Signal Integrity/High Speed Digital market. The company is moving beyond the technology developed by traditional microwave connector manufacturers to create innovative new connector and PC board products. All products are fabricated and assembled in the USA and France using military grade materials and processes.
TelonicBerkeley is a manufacturer of both standard and custom Radio Frequency (RF) and Microwave components such as fixed and tunable filters, diplexers, multiplexers, filter banks, etc., These products are used in Radar, Electronic Warfare Systems, Telecommunications, Satellites and many other applications, In addition, TelonicBerkeley offers an extensive product lineofprecisionRotary Attenuators.
Precision Modular Instrumentation: Signal switching, measurement and stimulus; precision data acquisition and integrated signal conditioning; COTS Solutions for Custom Microwave Requirements: High-density microwave interfaces (DC-40GHz) based on LXI/Ethernet; standard, OEM and turnkey design solutions.