 | Brandywine Communications
The FTSU-100D is Brandywine’s advanced network enabled distribution amplifier. The FTSU-100D will accept 1PPS and a reference frequency such as 10MHz from two sources. A second freque... read more >> |
 | Brandywine Communications
The AMC syncclock32 is one of Brandywine's newer time code reader/generator module and is a fully compliant advanced Mezzanine Card for time code synchronization of ATCA chassis. This s... read more >> |
 | Brandywine Communications
The CPCI SyncClock32 3U timing card provides precise 32 bit input/output timing to a computer that is equipped with 3U CPCI expansion slots. This compact PCI receiver modules provide a ... read more >> |
 | Brandywine Communications
The CPCI-SyncClock32 is a full featured CPCI or compact PCI interface with a complete line-up of standard features such as IRIG B, 1PPS, IRIG A, NASA time codes and a comprehensive list... read more >> |
 | Brandywine Communications
Brandywine’s Enhanced Network Time Appliance (ENTA) is a full function Network Time Server and Master Clock that offers the user precision time and frequencies in addition to the GPS ... read more >> |
 | Brandywine Communications
The FDA1050 is the perfect solution where an accurate frequency feed is required to multiple areas. For example, in the Power/Utilities industry, the FDA1050 is ideal for ensuring a sta... read more >> |
 | Brandywine Communications
The FDU-160i is a high performance signal distribution amplifier designed for use with Brandywine high precision time and frequency sources.
A variety of status indicators are locate... read more >> |
 | Brandywine Communications
For enhanced phase noise performance an optional clean up oscillator is installed between the rear panel inputs and the inputs of the transfer switch. A clean up oscillator may be inst... read more >> |
 | Brandywine Communications
Brandywine Communications new Model FOA-160 is a specialized distribution amplifier system used to distribute GPS or GLONASS signals over fiber optic cable to up to 16 receivers. The Mod... read more >> |
 | Brandywine Communications
The FRU is a state of the art, high-precision frequency standard capable of outputting ten isolated precision 10MHz frequency reference outputs. The FRU uses an internal GPS receiver... read more >> |
 | Brandywine Communications
The FTSU-100 is a high performance signal distribution amplifier designed for use with the Brandywine model PTS Precision Time System. Available in 1U and 2U sizes, both versions have h... read more >> |
 | Brandywine Communications
The GPS Airborne Approved PTS-SAASM is a frequency standard and complete master clock containing a GPS Rubidium Oscillator. This military timing system is one of the most reliable mas... read more >> |
 | Brandywine Communications
The GPS8 is a staple of Brandywine being a reliable, low cost Time and Frequency instrument offering a wide range of standard features in a compact, 1U rack-mount chassis. Precision tim... read more >> |
 | Brandywine Communications
The GPS8 Plus is a multi-output precision time and frequency standard that uses the Global Positioning System (GPS) to steer and hold an internal oscillator and clock system precisely o... read more >> |
 | Brandywine Communications
The frequency standard is also able to slave to an external 1PPS signal to steer and hold the internal oscillator and clock system precisely in time. Time and frequency information main... read more >> |
 | Brandywine Communications
The HPTS is able to function as a master clock to create custom systems requiring crucial timing accuracy. Brandywine won the subcontract to build the master timing system, the Frequenc... read more >> |
 | Brandywine Communications
The HQS was developed to facilitate long cable runs of both 1PPS and Have Quick signals for ships or aircraft requiring these timing reference signals at multiple locations. With the te... read more >> |
 | Brandywine Communications
A three-position front panel switch chooses automatic operation or may be used to manually select one of the two input sources. When the AUTO mode is selected the AUTO indicator will be ... read more >> |
 | Brandywine Communications
The IDC-100 is a small, rack mounted Network Time Server that uses modulated IRIG B as an input reference to accurately synchronize its internal clock. The IDC then provides accurate t... read more >> |
 | Brandywine Communications
Precision Time Protocol (PTP), described in the IEEE 1588-2008 version 2 standard, allows for extremely precise synchronization of networks. An absolute timing accuracy of better than 10... read more >> |
 | Brandywine Communications
The M210 is a Modular Timing System provides a Master Clock based upon a central microprocessor and a precision oscillator time base for many applications including synchronizing comput... read more >> |
 | Brandywine Communications
The Brandywine Communications M211 High Capacity Modular Timing System where a large number of reliable time/frequency outputs are required. With nine option-module slots and over thirt... read more >> |
 | Brandywine Communications Brandywine’s miniature GPS Disciplined Oscillator combines the power of our existing disciplined oscillators in a footprint the size of an OCXO. Designed with interoperability in mind, th... read more >> |
 | Brandywine Communications
Brandywine’s Modular Master Clock represents the next generation of modular timing systems. Built on the highly successful High Performance Timing System, the Modular Master Clock is ... read more >> |
 | Brandywine Communications
The NFS-220 is a low cost precision time and frequency standard that uses GPS for use in WI-FI, Wi-Max, satellite communications, telecommunications, and military communications. This f... read more >> |
 | Brandywine Communications
The NFS-220 plus is a low cost precision GPS time and frequency standard with a large display that reads time and date. This unit can be used for WI-FI, Wi-Max, satellite communications... read more >> |
 | Brandywine Communications
Brandywine Communications Network Time Adapter provides a convenient and flexible means of accurately time synchronizing computers, time displays, PBX's and a wide variety of other equi... read more >> |
 | Brandywine Communications
Brandywine’s NTP8 is a Network Time Server that provides a high performance means of accurate time distribution over a Local Area Network (LAN) using Network Time Protocol (NTP). The ... read more >> |
 | Brandywine Communications
Brandywine Communications NTV-100RG is an affordable, convenient and flexible NTP Server. This network time server accurately time synchronizes computers, time displays, PBX’s, and ... read more >> |
 | Brandywine Communications
The NVA family utilizes H.264 High Profile compression on each channel. This is the latest industry-standard compression algorithm, used in Blu-Ray recordings, and provides vastly super... read more >> |
 | Brandywine Communications |
 | Brandywine Communications |
 | Brandywine Communications Please Contact us for more information about these new products.
read more >> |
 | Brandywine Communications
Applications for Brandywine's OSA-3230 Cesium Clock include:
Calibration of laboratory's equipment
Reference for microwaves applications
Interferometry, S... read more >> |
 |
Versatility
The OSA 5240 GPS is versatile: besides supplying GPS-based frequency references, it can also retime E1/DS1 traffic channels whose timing has been impaired by SDH/SONET p... read more >> |
 | Brandywine Communications
The Precision Time Protocol (PTP) is a solution for the distribution of synchronization over IP-based packet networks such as IP, IP/MPLS, Ethernet, IP/xPON and IP/xDSL networks. PTP is... read more >> |
 | Brandywine Communications
The Precision Time Protocol (PTP) is a solution for the distribution of synchronization over IP-based packet networks such as IP, IP/MPLS, Ethernet, IP/xPON and IP/xDSL networks. Brandyw... read more >> |
 | Brandywine Communications
The OSA-5548C can be a Stratum 1 redundant source if you decide to include one of two possible GPS cards (this does not change the number of inputs or outputs available). There are 10 m... read more >> |
 | Brandywine Communications The OSA-5581C can also be configured with only one GPS input and holdover module for extremely low cost applications; upgrading to a fully redundant dual channel solution at a later stage ... read more >> |
 | Brandywine Communications
Applications
Synchronization of digital networks and switching equipment
Frequency distribution systems for satellite ground stations
Radio navigation a... read more >> |
 | Brandywine Communications
Applications
Radio Base Stations:
LTE/WiMAX/CDMA/UMTS/DVB-H SFN
Stratum II & III
Outdoor Base stations
Brandywine's OSA-8873 serie... read more >> |
 | Brandywine Communications
The Brandywine Communications PC104-SG is a timecode reader/ generator that provides precision time with zero latency to the host computer over the PC104 bus. An on-board microprocessor... read more >> |
 | Brandywine Communications
This is an advanced version of the PC104 SG module that conforms to PC/104Plus 2.0, and has many of the standard features you expect from Brandywine's bus level timing products includin... read more >> |
 | Brandywine Communications
The PCI SYNCCLOCK32-66Univ card is a digital clock with a PCI bus interface that will automatically synchronize to time reference signals. The 66Univ designates its’ ability to fun... read more >> |
 | Brandywine Communications
The PCI Syncclock32 univ module uses this time source to generate time from an integral disciplined oscillator, that can be accessed across the PCI bus card through a set of zero latenc... read more >> |
 | Brandywine Communications
A staple product of bus level timing, Brandywine's PCI card with optional GPS and IRIG B provides precision time with zero latency to the host computer over the PCI bus using the refe... read more >> |
 | Brandywine Communications
The PCI Express card uses its time source to generate time from an internal disciplined oscillator, that can be accessed across the PCI-Express bus through a set of zero latency time re... read more >> |
 | Brandywine Communications
Single CMC Size PCI Mezzanine Card (PMC) featuring standard conduction cooling bars. This syncclock has the same great features as our line of bus level timecode readers/generator with ... read more >> |
 | Brandywine Communications
Single CMC size PCI Mezzanine Card (PMC) featuring on-board GPS receiver. This time code generator/receiver card with 32 bit interface provides time from Microseconds through years. The... read more >> |
 | Brandywine Communications
Time synchronization can be achieved by simply reading the time registers, using the SYNCCLOCK card to generate periodic interrupts, or latch the time of an external event.
read more >> |
 | Brandywine Communications
The PTP Slave provides a high performance synchronization clock solution (SETS) for use in SDH/SONET back haul applications or as a replacement system, allowing for synchronization ov... read more >> |
 | Brandywine Communications
The PTS is a state of the art frequency instrument using a disciplined atomic clock to offer a wide range of features and time and frequency outputs accurate to <20ns rms to UTC (US... read more >> |
 | Brandywine Communications
Brandywine's Portable Timing Unit (PTU) is a low cost, battery operated, transportable timing system that is designed to provide precise time of day at point of use. The PTU may be auto... read more >> |
 | Brandywine Communications
A wide variety of applications for the Frequency Standard QFS-106 that require a precise frequency standard include radar systems, missile range timing systems, satellite command term... read more >> |
 | Brandywine Communications
The RG-2100 is a redundant reference frequency generator that uses Global Positioning System (GPS) to steer two internal low phase noise OCXO’s. Each GPS Disciplined Module provides a... read more >> |
 | Brandywine Communications
Brandywine’s RTG-510 has been designed for the customers in need of the latest technology and precision time to upgrade their current systems with a universal GPS time code processor ... read more >> |
 | Brandywine Communications
The STAR series is an OEM GPS Clock which offers superior time and frequency synchronization in a minimal space and at a ultra low cost. Based on a state-of-the art GPS receiver, the Cl... read more >> |
 | Brandywine Communications
Key Features
A multi-format precision time source in a very small form factor with low power consumption.
Can operate as a time code format translator: eg ... read more >> |
 |
Flight Qualified
Support for IEEE-1588 and GPS Havequick II I/O
Input IEEE-1588 and Convert to IRIG A/B
Tested to MIL-STD 810F and 461E CE1... read more >> |
 | Brandywine Communications
The TDU-310 provides 10 output channels of each of three signals – 1PPS, Have Quick and 50 bit/sec BCD time code. Two independent input references are supported, with fault monitoring... read more >> |
 | Brandywine Communications
The TFD8000 is a militarized time and frequency system has been qualified to rigorous military standards and uses modular construction to ensure complete flexibility and easy maintenanc... read more >> |
 | Brandywine Communications
Brandywine won the bid to upgrade all the displays and clocks within the New York Terminal Precinct
Brandywine won the contract to upgrade the mechanism in the New York Gr... read more >> |
 | Brandywine Communications
The TimeSpy precisely measures the time accuracy of a wide range of inputs (such as: NTP, IRIG B, 1PPS, and ASCII) against an internal precision GPS-controlled oscillator, displayed on ... read more >> |
 | Brandywine Communications
The VME timing card is a standard board level product of Brandywine Communications. With a single slot 6U, 32 bit precision timing module, the VME card is compatible with VME computers.... read more >> |
 | Brandywine Communications
The VXI-SyncClock32 is a bus level timing module that provides precision timing to a host computer through the VXI bus. The on-board microprocessor automatically synchronises the cloc... read more >> |